7202 K 5 A

Description

Number of cameras	2 stationary cameras
Camera type	5 MPix machine vision industrial cameras, RAW
Mounting type	Wall-mount
Cabinet type	Light-series (detached)
Applicability	Lift or Pit
Distance from cameras to the center of front turn tables	1500-2500mm, recommended distance 2200mm
Main advantages	Wall mounting allows to efficiently use all the available work space; 2-camera configuration is sufficient to organize a wheel alignment post on any pit; Set of 5Mpix cameras allows a better use of the aligner on the lift*; Does not need calibration and allows you to start working right after installation**.

* For lifts, the measurement height can be at approximately 900mm above the floor;
** Only when taking measurements in the plane of a vehicle. To take measurements relative to the horizontal plane it is necessary to perform horizon measurement.

Installation and Calibration

Mounting	Required (wall)
Calibration after mounting	Not required*

* Only when taking measurements in the plane of a vehicle. To take measurements relative to the horizontal plane it is necessary to perform horizon measurement.

Installation and calibration must be performed by a certified specialist.
This wheel aligner is supplied pre-calibrated and can be used right after installation.