YouTube FaceBook instagram
Select Your Region:
Menu

News

all news
11/10/2021 Techno Vector Group at «SEMA Show 2021» Techno Vector and iPRO equipment has been represented on November 2-5, 2021 at the international exhibition «SEMA» in Las Vegas
09/06/2021 Techno Vector Group at the exhibition "Interauto 2021" On August 24-27 Techno Vector represents its equipment at the "Interauto 2021"
11/01/2020 Techno Vector at the online exhibition «SEMA360» From 2nd to 6th of November 2020 Techno Vector represents its equipment online at the SEMA360

Certificates

all certificates

Techno Vector 7

V 7202 T 5 A


How to Buy?
More about model
(0)
0 из 5 Оценок: 0.

Description

Number of cameras 2 stationary cameras
Camera type 5 MPix machine vision industrial cameras, RAW
Mounting type Floor-mount. T-shaped pillar
Cabinet type V-series
Applicability Lift or Pit
Distance from cameras to the center of front turn tables 1500-2500mm, recommended distance 2200mm
Main advantages
  • Supports both pits and lifts*
  • Does not need calibration after installation**
* For lifts the measurement height can be set at approximately 900mm above the floor
** Only when measuring relative to the vehicle's plane. To measure relative to the horizon, horizon calibration is required.

Installation and Calibration

Mounting Required (floor)
Calibration after installation Not required*
* Only when measuring relative to the vehicle's plane. To measure relative to the horizon, horizon calibration is required.

Installation and calibration must be performed by a certified specialist.
This wheel aligner is supplied pre-calibrated and can be used right after installation.

Comment type is not specified in the component properties.