11/10/2021 Techno Vector Group at «SEMA Show 2021» Techno Vector and iPRO equipment has been represented on November 2-5, 2021 at the international exhibition «SEMA» in Las Vegas
09/06/2021 Techno Vector Group at the exhibition "Interauto 2021" On August 24-27 Techno Vector represents its equipment at the "Interauto 2021"
11/01/2020 Techno Vector at the online exhibition «SEMA360» From 2nd to 6th of November 2020 Techno Vector represents its equipment online at the SEMA360
|Number of cameras||4 stationary cameras|
|Camera type||2x1.3MPix and 2x5MPix machine vision industrial cameras, RAW|
|Mounting type||Floor-mount. T-shaped pillar|
|Applicability||Lift or Pit|
|Distance from cameras to the center of front turn tables||1200-2550mm, recommended distance 2200mm|
** When installed at the distance of more than 2200mm from front turn tables, the wheel aligner works from the lowest position of the lift up to the height of 1700mm.
Installation and Calibration
|Calibration after mounting||Not required*|
Installation and calibration must be performed by a certified specialist.
This wheel aligner is supplied pre-calibrated and can be used right after installation.
Comment type is not specified in the component properties.