11/01/2020 Techno Vector at the online exhibition «SEMA360» From 2nd to 6th of November 2020 Techno Vector represents its equipment online at the SEMA360
01/17/2020 Techno Vector at the «Automassan 2020» exhibition in Sweden Techno Vector represents the equipment on the exhibition «Automassan 2020» in Goteborg from 15 to 18 January 2020.
10/08/2019 Techno Vector 8 at the exhibition «AUTO SALON and AUTOWEEK» in Korea Contactless wheel aligner Techno Vector 8 at the exhibition «AUTO SALON and AUTOWEEK» on October 3-6, 2019.
|Number of cameras||4 stationary cameras|
|Camera type||2x1.3MPix and 2x5MPix machine vision industrial cameras, RAW|
|Applicability||Lift or Pit|
|Distance from cameras to the center of front turn tables||1200-2550mm, recommended distance 2200mm|
** When installed at the distance of more than 2200mm from front turn tables, the wheel aligner works from the lowest position of the lift up to the height of 1700mm.
Installation and Calibration
|Calibration after mounting||Not required*|
Installation and calibration must be performed by a certified specialist.
This wheel aligner is supplied pre-calibrated and can be used right after installation.
Comment type is not specified in the component properties.