Selection assistant
- Techno Vector 8
- Techno Vector 6 M
- Techno Vector 7
- Techno Vector 7 Truck
- Techno Vector 7 Truck MC
- Techno Vector 6
- Techno Vector 5
- Accessories
News
all news
10/08/2019
Techno Vector 8 at the exhibition «AUTO SALON and AUTOWEEK» in Korea
Contactless wheel aligner Techno Vector 8 at the exhibition «AUTO SALON and AUTOWEEK» on October 3-6, 2019.
10/01/2019
Techno Vector at the exhibition «AUTOTEC EXPO 2019» in Greece
27-29 of September 2019, Techno Vector equipment was represented at the AUTOTEC EXPO 2019 in Paianía (Greece)
09/11/2019
Techno Vector Group presented new products at the Interauto-2019
Techno Vector Group presented impressive new products at the exhibition Interauto-2019 in Moscow in the period 2-5 of September.
Certificates
all certificates
Product description
Description
Number of cameras | 4 stationary cameras |
Camera type | 2x1.3MPix and 2x5MPix machine vision industrial cameras, RAW |
Mounting type | Floor-mount. T-shaped pillar |
Cabinet type | T-series |
Applicability | Lift or Pit |
Distance from cameras to the center of front turn tables | 1200-2550mm, recommended distance 2200mm |
Main advantages |
|
** When installed at the distance of more than 2200mm from front turn tables, the wheel aligner works from the lowest position of the lift up to the height of 1700mm.
Installation and Calibration
Mounting | Required (floor) |
Calibration after mounting | Not required* |
Installation and calibration must be performed by a certified specialist.
This wheel aligner is supplied pre-calibrated and can be used right after installation.