|Number of cameras||5 movable cameras|
|Сamera type||3 video cameras 1.3MPix and 2 video cameras 5MPix|
|Mounting type||Floor-mount. Two low pillars.|
|Cabinet type||T - series|
|Distance from cameras to the center of front turn tables||2000 - 3500 mm *|
|* If it is necessary to measure control points of the frame near the front bumper, the distance from the cameras to the front turn tables should be not less than 3000mm.|
INSTALLATION AND CALIBRATION
Techno Vector 7204 HT MC wheel aligner is shipped completely calibrated. Installation is not required. The calibration should be performed only if parts of the wheel aligner were damaged and/or skewed.
Transportation of the device must be carried out in special package in enclosed means of transportation (enclosed freight cars, enclosed car bodies, holds, hermetically sealed compartments of aircraft).
When transported boxes with the devices must be rigidly fastened to the means of transportation. Rules of cargo handling must be followed according to the signs on the box: Fragile, This Side Up, Handle with Care, Keep Dry.