en
Request a call Login / Registration
Menu
Selection assistant
Pit
Lift
3D
Classic Infrared
Computer Cabinet
Runout Compensation
Clear

News

all news
11/01/2018 Techno Vector equipment at the SEMA show Techno Vector equipment at the SEMA show in Las Vegas (USA) on October 30 - November 2, 2018.
10/23/2018 Techno Vector 8 SMARTLIGHT at Auto Week 2018 The annual international show Auto Week 2018 took place in Seoul (South Korea) on October 19th to 21st, 2018.
10/16/2018 Techno Vector equipment at AUTOTECH 2018 trade show Techno Vector Equipment at AUTOTECH 2018 trade show in Plovdiv (Bulgaria), September 24-29

Certificates

all certificates

Techno Vector 7 Truck MC

V 7204 HT MC


How to Buy?

Description:

Number of cameras 5 movable cameras
Сamera type 3 video cameras 1.3MPix and 2 video cameras 5MPix
Mounting type Floor-mount. Two low pillars.
Cabinet type  V - series
Applicability Pit
Distance from cameras to the center of front turn tables 2000 - 3500 mm *
Main advantages
  • Techno Vector 7 7204 HT MC allows measuring trucks with the wheelbase up to 16 meters (or with the wheel base up to 23 meters for the customized version)
  • Drive-through is allowed.
* If it is necessary to measure control points of the frame near the front bumper, the distance from the cameras to the front turn tables should be not less than 3000mm.

INSTALLATION AND CALIBRATION

Techno Vector 7204 HT MC wheel aligner is shipped completely calibrated. Installation is not required. The calibration should be performed only if parts of the wheel aligner were damaged and/or skewed.

Transportation of the device must be carried out in special package in enclosed means of transportation (enclosed freight cars, enclosed car bodies, holds, hermetically sealed compartments of aircraft).

When transported boxes with the devices must be rigidly fastened to the means of transportation. Rules of cargo handling must be followed according to the signs on the box: Fragile, This Side Up, Handle with Care, Keep Dry.