News
all news
01/17/2020
Techno Vector at the «Automassan 2020» exhibition in Sweden
Techno Vector represents the equipment on the exhibition «Automassan 2020» in Goteborg from 15 to 18 January 2020.
10/08/2019
Techno Vector 8 at the exhibition «AUTO SALON and AUTOWEEK» in Korea
Contactless wheel aligner Techno Vector 8 at the exhibition «AUTO SALON and AUTOWEEK» on October 3-6, 2019.
10/01/2019
Techno Vector at the exhibition «AUTOTEC EXPO 2019» in Greece
27-29 of September 2019, Techno Vector equipment was represented at the AUTOTEC EXPO 2019 in Paianía (Greece)
Certificates
all certificates
Techno Vector 7 Truck
V 7204 H T
How to Buy?
/techno-vector/catalogue/techno-vector-7-truck/ -->
More about model
Description:
| Number of cameras | 4 immovable cameras. |
| Сamera type | 2 video cameras 1.3MPix and 2 video cameras 5MPix |
| Mounting type | Floor-mount. Two low pillars. |
| Cabinet type | V - series |
| Applicability | Pit |
| Distance from cameras to the center of front turn tables | 2000 - 3500 mm * |
| Main advantages |
|
| * If it is necessary to measure control points of the frame near the front bumper, the distance from the cameras to the front turn tables should be not less than 3000mm. |
Calibration of cameras
The TechnoVector 7 wheel aligners require setting and calibration of cameras on the bay.
Transportation of the device must be carried out in special package in enclosed means of transportation (enclosed freight cars, enclosed car bodies, holds, hermetically sealed compartments of aircraft).
When transported boxes with the devices must be rigidly fastened to the means of transportation. Rules of cargo handling must be followed according to the signs on the box: Fragile, This Side Up, Handle with Care, Keep Dry.
