YouTube FaceBook instagram
Select Your Region:


all news
11/10/2021 Techno Vector Group at «SEMA Show 2021» Techno Vector and iPRO equipment has been represented on November 2-5, 2021 at the international exhibition «SEMA» in Las Vegas
09/06/2021 Techno Vector Group at the exhibition "Interauto 2021" On August 24-27 Techno Vector represents its equipment at the "Interauto 2021"
11/01/2020 Techno Vector at the online exhibition «SEMA360» From 2nd to 6th of November 2020 Techno Vector represents its equipment online at the SEMA360

Wheel balancer iPRO BM4

How to Buy?
0 из 5 Оценок: 0.
Product description

Wheel balancer iPRO BM4

Technical characteristics

Measurement range for unbalanced mass, gr From 0 to 100
Unbalanced mass measurement discreteness, gr 1
Balancing cycle time (wheel 195/65R15), sec
From 4,1
The rim diameter of the balanced wheel, inches
- for stamped rims
- for light alloy rims

Maximum tire diameter of the balanced wheel, mm
Dimenstions of wheel balancing machine (WxDxH), mm, no more than
Protective case is up
Protective case is down

1343 x 910 x 1669
1343 x 809 x 1669
Maximum, weight of the balanced wheel, kg, no more than
Machine weight, kg, no more than
Alternate current power voltage, V
230  ±10%
Alternate current frequency, Hz 50
Consumed power, W 350


Wheel balancing machine is the accurate device, where data are processed and controlled bу the microprocessor, and which is designed for wheel balancing of cars, minivans and light trucks.
Wheel balancing machine provides the measurement of static and dynamic wheel unbalance and mass calculation of correctional weights and their positions in two correction planes (оп internal and external sides of wheel disk as well) during one measuring cycle. 

Measurement of rim geometrical shape is effected by a sensor installed inside of measuring ruler. The measurement result is displayed on the screen of the iPRO wheel balancer as a polar coordinate system.

After the measurement is done the program shows minimum, maximum, and nominal deviation.

 Wheel balancer iPRO BM4  Wheel balancer iPRO BM4

Ways how to start balancing

  •  Automatic – by the closing of the hood
  • By the press of the button START on the keyboard

 Wheel balancer iPRO BM4  Wheel balancer iPRO BM4

Sensors and automation

  • In wheel balancing equipment iPRO we use technical solutions that allow us to computerize and ease the usage of the equipment and make the customer service faster.

  • Wheel width measurement by the ultrasonic sensor 

  • Electromechanical brake for precise fixation of the wheel in the point of corrective weight installation 

  • Function of wheel additional turn to the point of corrective weight installation 

  • Precise indication of the corrective weight installation place effected by linear laser pointer  

  • Weight can be installed by the ruler 

 Wheel balancer iPRO BM4  Wheel balancer iPRO BM4  Wheel balancer iPRO BM4

Dimensions of wheel balancing machine 


Сертификат  Wheel balancer iPRO BM4 Сертификат  Wheel balancer iPRO BM4 Сертификат  Wheel balancer iPRO BM4 Сертификат  Wheel balancer iPRO BM4

Comment type is not specified in the component properties.