Wheel balancers
News
all news
11/01/2020
Techno Vector at the online exhibition «SEMA360»
From 2nd to 6th of November 2020 Techno Vector represents its equipment online at the SEMA360
01/17/2020
Techno Vector at the «Automassan 2020» exhibition in Sweden
Techno Vector represents the equipment on the exhibition «Automassan 2020» in Goteborg from 15 to 18 January 2020.
10/08/2019
Techno Vector 8 at the exhibition «AUTO SALON and AUTOWEEK» in Korea
Contactless wheel aligner Techno Vector 8 at the exhibition «AUTO SALON and AUTOWEEK» on October 3-6, 2019.
Product description
Certificates
Wheel balancer iPRO BM5
Technical characteristics
Measurement range for unbalanced mass |
From 0 to 100g |
Limits of ассерtаblе relative inaccuracy of unbalanced mass measurement |
±(3+0,1*M) M - measured unbalanced mass, g |
Definition range for correction weight installation angle | From 0° to 360° |
Limits of ассерtаЫе absolute inaccuracy of werght installatюn angle definition | ±5° |
The rim diameter of the batanced wheel | From 262 to 762mm |
Maximal tyre diameter of the balanced wheel | 900mm |
The maximum width of the balanced wheel |
500mm |
Dimenstions of wheel balancing machine (WxDxH), no more than Protective case is up Protective case is down |
1250 х 1050 х1570mm 1250 х 1060 х 1520mm |
Maximal weight of the balanced wheel, no more than |
70kg |
Weight of the wheel balancin machine, по more than |
150kg |
Power voltage of the alternate current |
220V ±10% |
Frequency of the alternate current |
50 Hz |
Consumed power | 350 W |
Description
Wheel balancing machine is the accurate device, where data are processed and controlled Ьу the microprocessor, and which is designed for wheel balancing of cars, minivans and light trucks (maximal wheel tire diameter is 900mm and maximal wheel tire width is 500mm).
Wheel balancing machine provides the measurement of static and dynamic wheel unbalance and mass calculation of correctional weights and their positions in two correction planes (оп internal and external sides of wheel disk as well) during one measuring cycle.
Wheel balancing machine provides the measurement of static and dynamic wheel unbalance and mass calculation of correctional weights and their positions in two correction planes (оп internal and external sides of wheel disk as well) during one measuring cycle.
Two additional rotating shelves consisting 10 sells fог small weights.

Additionals shelves fог stoгage of balancing weights bохеs, cones and other tools.

Single board microcomputer with the high-performance processor 4 cores and 64-Ьits provides high precision of measurement and an excellent graphics.
Large wheel protectlve case equipped with а limit switch.
Dimensions of wheel balancing machine
Comment type is not specified in the component properties.