YouTube
Select Your Region:
Menu

News

all news
09.12.2024 TechnoVector and iPRO Equipment at Automechanika Shanghai 2024 On December 2-5, 2024 TechnoVector showed its wheel alignment equipment at Automechanika Shanghai 2024 in China.
16.09.2024 TechnoVector at Automechanika 2024 On September 10-14, 2024 TechnoVector equipment was featured at the show in   Germany
20.05.2024 TechnoVector at AutoServiceTec in Italy May 17th to 19th 2024 TechnoVector equipment was featured in Catania

TechnoVector 7

P 7202 TAS

Add to request
Product description

Premium Computer Cabinet

  • Ergonomic control panel
  • Recess for tablet* installation
  • Section for bar code reader* and tools
  • Comes with Full HD monitor




  • Easy access to printer* thanks to roll-out shelf
  • Pullout drawers for tools (622х383mm)
  • Brackets to store wheel adapters and targets




  • Bumper along the perimeter prevents the cabinet from damage when moving
  • Brackets for steering wheel holder and brake lock at the rear panel.



Main Advantages:

Number of cameras 2 video cameras
Type of cameras Industrial Grade HD high-precision optical RAW cameras
Type of mounting Mobile, T-pillar
Computer cabinet Mobile, P-cabinet
Applicability Lift or pit
Distance from cameras to the center of front turn tables

-2200mm to 2800mm – for lifts
-from 2900mm to 3500 mm (if the lift is located at the floor level) – for pits

*The optimal distance is 2200mm. At such a distance the 2-camera wheel aligner’s vision range covers wheels of a car at a lift height of 650mm to 1750mm.
At a distance of 2800mm from the cameras to the front turn tables, the operability of the lift is ensured from a height of 180mm to 1700mm.

Advantages
  • The beam with cameras should be fastened on the top of the pillar.
  • Mobile machine recommended for shops equipped with several workplaces.
  • Additional RGB LED displays show prompts for technicians.
  • The price is lower than that for the similar 4-camera model.
 

Features

One of the advantages of this machine is that it can be used as a mobile or as a stationary version, as you prefer.
The pillar can be fastened to the cabinet on wheels to create a mobile model to move it between different wheel alignment posts, in case there are several of them.


On the other hand, the pillar can be mounted on the floor to remain immovable and the cabinet on wheels can be rolled around the shop.
All necessary spare parts are included in the set.





Extra displays show hints for technicians and can be useful when the monitor is obstructed by the lift or car



rgb2.jpg

Light targets made of magnesium alloy are of a smaller size and can be used with magnetic clamps*** (if necessary)

*** - Magnetic clamps are not included in the base configuration and can be ordered separately.


Installation and Calibration

Installation Required
Calibration after installation   
Not required**
* Not included.

** Calibration after installation is recommended. Without calibration after installation the wheel aligner makes correct measurements only in the plane of the car.

This wheel aligner is supplied pre-calibrated and can be used right after installation.
Installation and calibration must be performed by a certified specialist.

Comment type is not specified in the component properties.