Wheel balancers
News
all news
21.06.2023
TechnoVector at AUTOMOTIVE EXPO SOFIA
On June 15-17, 2023 TechnoVector equipment was presented at the international show AUTOMOTIVE EXPO SOFIA in Bulgaria
22.05.2023
TechnoVector equipment at «AutoServiceTec» in Italy
On May 19-21, 2023 the equipment TechnoVector has been represented in Catania
19.05.2023
TechnoVector equipment at «Automative Day» in Italy
On May 16-18, 2023 the equipment TechnoVector has been represented in Verona
Wheel balancer TechnoVector BM3
Add to requestProduct description
Wheel balancer TechnoVector BM 3
Technical characteristics
Measurement range for unbalanced mass, gr | From 0 to 100 |
Unbalanced mass measurement discreteness, gr | 1 |
Balancing cycle time (wheel 195/65R15), sec |
From 5,5 |
The rim diameter of the balanced wheel, inches - for stamped rims - for light alloy rims |
12-28 13-28 |
Maximum tire diameter of the balanced wheel, mm |
900 |
Dimenstions of wheel balancing machine (WxDxH), mm, no more than Protective case is up Protective case is down |
1138 x 910 x 1669 1138 x 809 x 1669 |
Maximum, weight of the balanced wheel, kg, no more than |
70 |
Machine weight, kg, no more than |
145 |
Alternate current power voltage, V |
230 ±10% |
Alternate current frequency, Hz | 50 |
Consumed power, W | 350 |
Functional features
Automatic identification of wheel rim inner surface by the electronic measuring ruler
Measurement of rim geometrical shape is effected by a sensor installed inside of measuring ruler. The measurement result is displayed on the screen of the iPRO wheel balancer as a polar coordinate system
After the measurement is done the program shows minimum, maximum, and nominal deviation.
Measurement of rim geometrical shape is effected by a sensor installed inside of measuring ruler. The measurement result is displayed on the screen of the iPRO wheel balancer as a polar coordinate system
After the measurement is done the program shows minimum, maximum, and nominal deviation.
Ways how to start balancing
- Automatic – by the closing of the hood
- By the press of the button START on the keyboard
Wheel balancer Internet connection through Wi-Fi, automatic data transition and cloud storage, 24/7 access for the owner (authorized person) from any location
Features of TechnoVector BM3 wheel balancer
- The main working surface contains 15 cross-functional cells for storage of balancing weights, cones, and other tools.
- Additional space provided by drawers for storage of balancing weights boxes and other tools.
Dimensions of wheel balancing machine
Comment type is not specified in the component properties.