YouTube
Select Your Region:
Menu

News

all news
20.05.2024 TechnoVector at AutoServiceTec in Italy May 17th to 19th 2024 TechnoVector equipment was featured in Catania
28.03.2024 TechnoVector at DDOR BG Car Show & Motopassion On March 21-27, 2024 TechnoVector 8 contactless machine was featured in the trade show in Serbia
25.03.2024 TechnoVector and iPRO at AMTS 2024 On the 21-24th of March 2024 TechnoVector and iPRO equipment was featured at the show in Hungary.

Wheel balancer TechnoVector BM4

Add to request
Product description

Wheel balancer TechnoVector BM4

Technical characteristics

Measurement range for unbalanced mass, gr From 0 to 100
Unbalanced mass measurement discreteness, gr 1
Balancing cycle time (wheel 195/65R15), sec
From 4,1
The rim diameter of the balanced wheel, inches
- for stamped rims
- for light alloy rims

12-28
13-28
Maximum tire diameter of the balanced wheel, mm
900
Dimenstions of wheel balancing machine (WxDxH), mm, no more than
Protective case is up
Protective case is down

1343 x 910 x 1669
1343 x 809 x 1669
Maximum, weight of the balanced wheel, kg, no more than
70
Machine weight, kg, no more than
160
Alternate current power voltage, V
230  ±10%
Alternate current frequency, Hz 50
Consumed power, W 350

Description

Wheel balancing machine is the accurate device, where data are processed and controlled by the microprocessor, and which is designed for wheel balancing of cars, minivans and light trucks.
Wheel balancing machine provides the measurement of static and dynamic wheel unbalance and mass calculation of correctional weights and their positions in two correction planes (on internal and external sides of wheel disk as well) during one measuring cycle. 


Measurement of rim geometrical shape is effected by a sensor installed inside of measuring ruler. The measurement result is displayed on the screen of the iPRO wheel balancer as a polar coordinate system.


After the measurement is done the program shows minimum, maximum, and nominal deviation.


 Wheel balancer TechnoVector BM4  Wheel balancer TechnoVector BM4

Ways how to start balancing

  •  Automatic – by the closing of the hood
  • By the press of the button START on the keyboard


 Wheel balancer TechnoVector BM4  Wheel balancer TechnoVector BM4

Sensors and automation

  • In wheel balancing equipment TechnoVector  we use technical solutions that allow us to computerize and ease the usage of the equipment and make the customer service faster.

  • Wheel width measurement by the ultrasonic sensor 

  • Electromechanical brake for precise fixation of the wheel in the point of corrective weight installation 

  • Function of wheel additional turn to the point of corrective weight installation 

  • Precise indication of the corrective weight installation place effected by linear laser pointer  

  • Weight can be installed by the ruler 

 Wheel balancer TechnoVector BM4  Wheel balancer TechnoVector BM4  Wheel balancer TechnoVector BM4


Dimensions of wheel balancing machine 

 Wheel balancer TechnoVector BM4

Сертификат  Wheel balancer TechnoVector BM4 Сертификат  Wheel balancer TechnoVector BM4 Сертификат  Wheel balancer TechnoVector BM4 Сертификат  Wheel balancer TechnoVector BM4

Comment type is not specified in the component properties.