V 5216 R PRRC

Description

TechnoVector V 5216 R PRRC wheel aligner is composed of a computer and 4 measurement units. In total there are 8 CCD cameras and 8 high precision tilt sensors.
Measurement units use infrared transmitters and recievers to communicate with each other. Connection with a computer is done using a wireless computer network (WiFi).

PRRC feature allows to perform runout compensation.

Computer cabinet: V-series.

Calibration

Wheel aligner is shipped completely calibrated. Calibration device is included with the wheel aligner. It is necessary to recalibrate the aligner every 6 months.

Dimensions

Packaging type	Dimensions (mm)	Quantity
Cardboard package on a wooden pallet (computer cabinet)	820x680x1200	1
Wooden box	1230х600х360	1
Wooden box	930х360х540	2
Wooden box	500x455x380	1
Wooden box (calibration device)	1805x250x540	1
Cardboard box (computer case)	400х230х460	1
Cardboard box (computer monitor)	450х450х125	1

Gross weight: 250 kg.
Volume: 1,70 m³.

Transportation of the device should be carried out in special package in enclosed means of transportation (enclosed freight cars, enclosed car bodies, holds, hermetically sealed compartments of aircraft).
When transported all packages must be rigidly fastened to the means of transportation. Rules of cargo handling must be followed according to the signs on the box: Fragile, This Side Up, Handle with Care, Keep Dry.

Comment type is not specified in the component properties.